[amsat-bb] IC-9100 SatPC32 Sub Audible Tone for SO-50

[Erich Eichmann]

Hi Frank,
the program should come with the correct data for IC-9100 for the sub 
tone frequencies for 67.0 and 74.4 Hz. Unfortunately I don't have an 
IC-9100 (I loaned one from Icom when I added the functions to the 
program). So, presently I can't test the function myself.

The sub tone frequency must be set on the Sub VFO because it is the TX 
VFO in Satellite mode. When you check the tone frequency the radio 
displays the tone frequency  of the Main VFO (if I remember correctly). 
So, did you first swap the VFOs before you checked the tone frequency 
and whether ist changes to 74.4 with T2?

73s, Erich, DK1TB

Am 01.07.2015 um 07:47 schrieb Frank Westphal:
> I have acquired an ICOM IC-9100 and am stumped on how to program 
> SatPC32 to select the correct sub audible tone for SO-50.  I have 
> studied the SubToneSQF file and the ICOM manual.  When I click on T0 
> and change it to T1 or T2 in SatPC32 the sub audible tone is turned on 
> in the IC-9100.  The tone frequency in the IC-9100 does NOT change to 
> the value in the SubToneSQF file.
>
> Has anyone figured out haw to correctly setup SatPC32 SubToneSQF file 
> to work with the IC-9100?  Could you post the correct command line so 
> I could copy it into my file?
>
> Thanks in advance for any guidance.
>
> Frank
> K6FW
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. 
> Opinions expressed
> are solely those of the author, and do not reflect the official views 
> of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite 
> program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>