[amsat-bb] remote sat ops

[Erich Eichmann]

Jeff,
You can  remotely switch the radio between RX and TX (PTT). In the 
SatPC32 main window double click on the Statusbar at the bottom of the 
window. Three TX/RX "buttons" will appear in the corners of the map. If 
the remote link fails while the  radio is in TX the program will 
automatically switch it back to RX after a selectable  period (menu 
"Options"). Default is 60 seconds. If you set the value to 0 the 
functions is disabled.
73s, Erich, DK1TB

Am 14.07.2015 um 16:24 schrieb kb2m at arrl.net:
> Is anyone using TeamViewer  (or any other remote PC control s/w) to control
> their sat station remotely? I'm able to run SatPC32 remotely to control my
> Yaesu rotor, LVBTracker, 9100 sat system. Thanks to Erich I can view the
> actual and target az el position of the rotor with a version of serverSDX.
> I'm looking for a  s/w program to remotely control radio functions like
> PTT, and also handle rx/tx audio. I will be heading back to Florida for the
> winter in October so I have plenty of time to set this up. I also have a
> small shore home that is 60 miles away to test from as I go down there every
> week for a few days. Any suggestions from experienced remote sat ops before
> I start  looking?
>
>   
>
>   
>
> 73 Jeff kb2m
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>