[amsat-bb] SatPC32 actinh wierd

[Jeff]

I feel your pain Scotty, I  have a similar problem with my 9100, LVB, and 
SatPC32. In my case the LVB would show a memory error and I would lose 
calibration. Only way to fix would be a full re-calibration. This is a real 
pain to go through during a pass so I just remember to turn on the LVB, then 
the 9100, then bring up SatPC32. I know of no other way around this....

73 Jeff kb2m

-----Original Message----- 
From: Scott Smith
Sent: Sunday, June 21, 2015 4:00 PM
To: Amsat
Subject: [amsat-bb] SatPC32 actinh wierd

Hi, I fired up  my SatPC32 in the wrong order from the way I usually do it, 
I usually turn on radio and my LVB tracker first then fire up the computer. 
The LVB  works fine,but I got a message “could not open Com3 and to check if 
It was available” this is weird as this laptop is dedicated only for 
satellite use, and I have not changed anything. I use a Kenwwod IF232r 
between my computer and my TS790a radio. I opened the device manager and it 
says for the FT232r USB UART “the drivers for this device are not installed 
(Code 28). I tried to downoard the driver from ZLP and it still does not 
work?, any ideas? Tnx in advance. 73 de VE6ITV Scott
_______________________________________________
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions 
expressed
are solely those of the author, and do not reflect the official views of 
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb