[amsat-bb] 9600 baud and IC-9100

[David L Warnberg]

Well that throws a wrench in the works.... humm

Thanks for the info... did not see anything about this in the manual at all

Thanks Again

David,  KK4QOE

-----Original Message-----
From: David W0DHB [mailto:dave at w0dhb.net] 
Sent: Wednesday, May 27, 2015 5:41 PM
To: 'David L Warnberg'; amsat-bb at amsat.org
Subject: RE: [amsat-bb] 9600 baud and IC-9100

David

This is true, the unprocessed FM audio require for 9600 baud packet is only
on pin 4 of the DATA2 jack, it is not available through the USB soundcard
built in to the 9100.  :-( 

Dave W0DHB

-----Original Message-----
From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of David L
Warnberg
Sent: Wednesday, May 27, 2015 10:25 AM
To: amsat-bb at amsat.org
Subject: [amsat-bb] 9600 baud and IC-9100

Ok, so I'm hearing something I cannot verify. I have be trying to capture
9600 baud packets from BRICSat. Now I discover  on the IC-9100 yahoo group
someone is saying the IC-9100 does not handle 9600 baud packets over the USB
port.  I find this hard to believe but can any confirm or deny this claim?

 

I have had issues catching anything with the IC-9100 and 9600 baud packets
so was wondering if it was the setup or the radio.

 

All feedback welcome please..

 

David,  KK4QOE

_______________________________________________
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available to all
interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb