[amsat-bb] what's a good start freq for PSAT using DopplerPSK?

[Robert Bruninga]

My guess is that 28.1215 should put you close to the center of the
passband.  And remember, you can just keep the key down throughout the
pass... it is full duplex and so you can see if you are colliding with
someone in the display.

Though listen first on 10 meters, since we are using the same common
frequency band as terrestrial users.
BOb

-----Original Message-----
Subject: Re: [amsat-bb] what's a good start freq for PSAT using
DopplerPSK?
I tried about every 100hz from 118 to 121 and never broke the squelch.
Using 90 watts.