[amsat-bb] HDSDR SDRplay 817 issue

[Clayton W5PFG]

Yes, I use VSP with HDSDR to full integrate with SatPC32 successfully.

Make sure radio 2 is set to the proper radio type in SatPC32 for the 
FT-817.  Use radio 1 for the CAT interface to HDSDR. It will appear as a 
Kenwood TS-2000.  You will need to activate CAT in HDSDR for it to work.

I have used this setup many times for a full automated SDR station on 
the satellites with a FUNcube Dongle Pro + and FT-857D.

73
Clayton
W5PFG

On 10/4/2015 13:40, kb2m at arrl.net wrote:
> I'm trying to get HDSDR and SatPC32,  to play nicely with  HDRplay and an
> FT-817. I have the HDSDR working with SDRplay like Patrick has demonstrated
> on here and I'm trying to complete the setup for an fully automated system.
> I'm trying to get the setup working to the point that if I change the uplink
> frequency on the 817  with its physical dial the downlink on HDSDR will
> follow. I'm about half way there. I'm  at the point if I change the downlink
> frequency in SatPC32 the HDSDR display changes with it, but not the 817's
> uplink frequency. When I first load SatPC32 the 817's frequency changes to
> the correct uplink frequency but doesn't update afterwards. I'm using VSP
> Manager to create the VSP's I think  I'm a little confused about how this
> should all hook together serially. Anyone have this working 100% ?
>
>
>
> 73 Jeff kb2m
>
>
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>