[amsat-bb] QRG for Telemetry on Fox-1A ?

[Paul Stoetzer]

Just a reminder - since the low data rate telemetry is subaudible, you
will likely need to use the 9600 baud data out pin (and select the
9600 baud packet mode in the 817 menu) to get the unfiltered audio for
decoding telemetry.

73,

Paul, N8HM



On Thu, Oct 8, 2015 at 4:20 PM,  <dave at g4dpz.me.uk> wrote:
> Got my 817 hooked up to macDoppler ready for the next pass over Europe.
>
> 73
>
> Dave, G4DPZ
>
> Sent from my iPhone
>
>> On 8 Oct 2015, at 20:54, David Rush <david at rushtone.com> wrote:
>>
>> Yes, as I understand it it should be on 145.980 MHz.
>>
>> I've got my Funcube Dongle Pro+ plumbed into FoxTelem.  It seems to lie in wait around 145.995-ish, but when I keyed up an HT at 145.980 it slinked its way down and centered on the HT's signal (even without "Find Signal" checked).
>>
>> I even tried playing the test telemetry audio on another computer, with the HT's mic held up near the speaker.  I don't think it decoded anything, but since the telemetry is "sub-audible" I imagine it got filtered out by the HT.  The squiggly lines on FoxTelem seemed to react to the noise, so that confirms that it's hearing something.
>>
>> I think I've got mine ready and waiting for the next fly-over, which SatPC32 says starts at 23:57z down here in EM72 land.
>>
>> 73, David, ky7dr
>>
>>> On 2015-10-08 11:19, Bob KD7YZ wrote:
>>> I have the fox-1 telemetry program running; am tracking using the
>>> guesstimate Keps .. but what is the freq for telemetry?
>>> Currently I am on 145.980 FM
>>
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership. Opinions expressed
>> are solely those of the author, and do not reflect the official views of AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb