[amsat-bb] Used the FCDP+ but no decodes.

[Bob KD7YZ]

I saw the "Eye" mentioned in the manual a few times. but the entire
pass, to elevation about 50 degrees, never once decoded anything.

I selected the FCDP+ from the pull-down. That defaulted to 192K.
on the graph was "sample rate = 48000 samples 70"
I'm guessing there were no other things to set on the front page.

One more chance in an hour if I can get help on the FCDP+ as I gave up
on modifying my IC910 SignaLink cables.

-- 
73,
Bob KD7YZ
www.qrz.com/db/kd7yz
AmSat LM#901