[amsat-bb] ao 85 telem help

[Alan]

Nick,

I am traveling, so have not had a chance to use live data.  PowerSDR
attenuates the audio significantly below 300 Hz, but is not a brick wall.
You can hear and see the PL tones on a local repeater.  During pre-launch
testing, I was able to play I/Q files through PowerSDR and get fair copy of
telemetry, but not anywhere as good as through a program which does not have
low pass filtering, such as SDR#.  Dave, W0DHB suggested switching to I/Q
from PowerSDR to FoxTelem which _should_ bypass the filtering.  I will get a
chance to test it in a few days.

I found the secret of getting audio from the monitor is to turn it on.  :)
The button label is backward to my thinking.  You will need to uncheck some
of the filtering boxes to get full voice audio.

73s,

Alan
WA4SCA 

-----Original Message-----
From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of Nick Pugh
K5QXJ
Sent: Saturday, October 10, 2015 5:59 AM
To: amsat-bb at amsat.org
Subject: [amsat-bb] ao 85 telem help

My set up is flex 5000 virtual audio cables I get good eye pattern when
signal is not if a fade. But have not been able to decode telemetry.

I also have no audio out on the monitor.

 

Any suggestions?

 

 

 

 

 

Thanks

 

nick

Office   337 593 8700

Cell      337 258 2527

 

Helping UL become a world Class Engineering  and Educational School

Disagree I Learn

 

 

_______________________________________________
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb