[amsat-bb] How to Know When Your AO-85 Telemetry Has Been Uploaded?
Wouter Weggelaar
wouterweg at gmail.com
Sun Oct 25 09:29:00 UTC 2015
Delfi-C3 RASCAL does that, and its now in its 7th+ year in space.
Also, the FUNcube dashboard can do it, albeit in a slightly convoluted way
if you close the program in between. (Save the pass and replay it when you
have an internet connection)
If you leave the program running and restore the internet connection it
will automatically pick up where it left off.
I am sure many other telemetry clients will have similar features, that may
or may not be obvious to the user.
Wouter PA3WEG
On Fri, Oct 23, 2015 at 6:07 PM, Scott <scott23192 at gmail.com> wrote:
> Hello Daryl. Hopefully someone with more knowledge that I have will
> reply, but it worked very well for me.
>
> Don't forget that you can make a copy of your log folder before purging
> the data from inside the FoxTelem software so that you can put things back
> if you don't like the results after re-running the pass from your .WAV
> recording.
>
> I'm not a programmer, but if it's do-able, I think it would be great if
> future versions of all the various cubesat telemetry applications have the
> ability to store a download and then upload it when the computer is back on
> an internet connection. Of course I realize that would add complexity
> since each packet would have to have a timestamp if it's not being uploaded
> in real time.
>
> -Scott, K4KDR
> Montpelier, VA USA
>
>
>
> --------------------------------------------------------------------------------
>
> ----- Original Message -----
> From: Daryl Young
> To: amsat-bb at amsat.org
> Sent: Thursday, October 22, 2015 19:03
> Subject: Re: [amsat-bb] How to Know When Your AO-85 Telemetry Has Been
> Uploaded?
>
>
> Hi !
>
> With help from K4SQC I finally got some AO85 telemetry to decode! After
> the 186 payloads were decoded (high speed on that pass!) and the pass
> was complete I realized "upload to server" was not checked, so I checked
> it.
>
> Is the information below accurate, the already decoded telemetry will
> not now or ever upload to the server? We did record the pass in HDSDR
> so I should be able to follow the path Scott took but I'd like to verify
> this before "dumping" the decodes.
>
> Thanks!
>
> *Daryl
> K4RGK
>
>
> *
> On 10/10/2015 7:42 AM, Scott wrote:
> > Yes, after trying everything that I could think of with no luck, it
> occurred to me that I could dump the data that had been received previously
> (when "upload" was turned off) and replay my I/Q file once again into the
> Fox Telem software with "upload" turned on.
> >
> > That worked, but only 4 packets uploaded even though the software
> indicated 10 decodes. Not sure why, but I was satisfied... I don't
> consider it a competition; I really just wanted to get completely through
> the process and actually have some data upload to the site.
> >
> > I do have some observations that I'll share on the chance that it
> helps someone else.
> >
> > While several bit rates are available in the Fox Telem software on a
> drop-down menu, the documentation recommends 48,000. So, before replaying
> my I/Q file that last time, I reconfigured SDR# as well as the VB-Cable
> audio link to both work at 48,000. Sure enough, I decoded many more
> packets than I had previously. Going forward I'll capture the data with
> those settings.
> >
> > Last night's pass might have been unique in that it was a minute of
> slow-speed data but then transitioned to high-speed. So, I had to replay
> my I/Q file twice... once with the Fox Telem software set to slow data and
> again with it set to high. However, I realize now that I could have easily
> paused the playback in SDR#, stopped the Fox Telem input, switched to high
> speed, and resumed the playback.
> >
> > Since I'm not going to have an internet connection during the initial
> data capture, it would appear that the correct sequence of events for my
> configuration will be to only use the Fox Telem software during a fly-over
> to give me some feedback as to how well I'm receiving. I'll then dump the
> resulting payload and replay the recorded I/Q file with an active internet
> connection and the Fox Telem software set to upload. It would be wonderful
> if the software would "store & forward" the packets once online, but this
> might be a blessing in disguise as there is every chance that I'll have a
> better result decoding under controlled conditions where I'm don't have my
> hands full with an antenna, etc.
> >
> > Also, I see that many people with more advanced setups are able to
> play their recorded I/Q .wav files directly in the Fox Telem software. I
> did not have any success with that and I actually liked replaying my
> recordings in SDR# so that I could verify that I was centered on the
> carrier and make minor frequency adjustments. I was also tweaking output
> levels on replay. I didn't really know if there was any benefit in that,
> but I told myself that I was keeping the waveforms on the Fox Telem
> software as "clean" as possible in hopes of more decodes. Similar apps
> give some level feedback so you'll know if you are feeding it at the right
> volume, but it's still a really nice app.
> >
> > At any rate, I was pretty tickled with any success at all and VERY
> appreciative of the information that others have shared.
> >
> > In summary, my setup is:
> >
> > -Arrow dual-band antenna (will test some future passes with omni QFH
> when elevation is high)
> > -$20 RTL-SDR dongle
> > -SDR# on Windows-7, FM-narrow @ 32k bandwidth with audio set to
> 48,000, doppler tracking from Orbitron
> > -VB Cable set to 48,000
> > -Fox Telem software with AF input set to VB-Cable @ 48,000
> >
> >
> >
> --------------------------------------------------------------------------------
> >
> >
> --------------------------------------------------------------------------------
> >
> > ----- Original Message -----
> > From: David G0MRF
> > To: scott23192 at gmail.com
> > Sent: Saturday, October 10, 2015 03:28
> > Subject: Re: [amsat-bb] How to Know When Your AO-85 Telemetry Has
> Been Uploaded?
> >
> >
> > Hi.
> > There is a K4KDR-FM17 in the list with 4 somethings (frames
> payloads packets or whatever)
> >
> > Thanks
> >
> > David
> >
> >
> > -----Original Message-----
> > From: Scott <scott23192 at gmail.com>
> > To: amsat-bb <amsat-bb at amsat.org>
> > Sent: Sat, 10 Oct 2015 2:45
> > Subject: [amsat-bb] How to Know When Your AO-85 Telemetry Has Been
> Uploaded?
> >
> >
> > My Fox 1 Telemetry Analysis Tool is showing "Decoded: 8" and "Queued:
> 0" at
> > the
> > bottom of the screen.
> >
> > I have my station details complete and the box to
> > "Upload to Server" is
> > checked.
> >
> > Not seeing my call sign on the Leaderboard
> > Statistics page, but I have no
> > idea how long to wait before I should expect
> > some feedback from an upload
> > to be reflected on that page.
> >
> > Is there some way
> > to know when the Windows App has completed an upload
> > successfully?
> >
> > I have
> > logging enabled and see a line as follows:
> >
> > =====
> > Trying Primary Server:
> > tlm.amsat.org:41041
> > =====
> >
> > ... but no indication of a successful -or- failed
> > upload. I do have an
> > active internet connection.
> >
> > Many thanks.
> >
> > -Scott,
> > K4KDR
> > Montpelier, VA
> > USA
> > _______________________________________________
> > Sent via
> > AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> > to all interested
> > persons worldwide without requiring membership. Opinions expressed
> > are solely
> > those of the author, and do not reflect the official views of AMSAT-NA.
> > Not an
> > AMSAT-NA member? Join now to support the amateur satellite
> > program!
> > Subscription settings:
> > http://www.amsat.org/mailman/listinfo/amsat-bb
> > _______________________________________________
> > Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions expressed
> > are solely those of the author, and do not reflect the official views
> of AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >
> >
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership.
> Opinions expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
More information about the AMSAT-BB
mailing list