[amsat-bb] Driver for M2 rotors

[Daniel Kekez]

Hi Jim,

I use STL Tracker for tracking and controlling the M2 Rotators:
	http://www.stltracker.com/
It works with a few different versions of the M2 controller. It's free
to download and use, but to save the configuration you need to purchase
a serial number.

73,
-Daniel, VA3KKZ


On 09/04/2015 23:53, Jim White wrote:
> Does anyone know of a program, or a rotor driver for a tracking program,
> that works with the M2 RX2800PX rotor control boxes?  They use a serial
> interface.  It works something like this
> The computer sends "A<CR>" and the rotor control box sends back the
> current azimuth
> Computer sends "E<CR>" and rotor sends back current elevation
> Computer sends "A68.4<CR>" and the rotor goes to azimuth 68.4
> 
> etc.
> 
> Any ideas on a tracker that talks that language?
> 
> Jim
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership.
> Opinions expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb