[amsat-bb] Yaesu G-5500 Control Box Problem

[Rafael Pena]

No, none.

The rotor works while using SatPC32 and the LVB tracker…maybe I used it for more than 5 minutes per the doc?

From: Stefan Wagener [mailto:wageners at gmail.com]
Sent: Sunday, December 04, 2016 5:49 PM
To: Rafael Pena <pinoleronica at hotmail.com>
Cc: amsat-bb at amsat.org
Subject: Re: [amsat-bb] Yaesu G-5500 Control Box Problem

Any loose cables in the back of the control box?

Stefan

On Sun, Dec 4, 2016 at 4:46 PM, Rafael Pena <pinoleronica at hotmail.com<mailto:pinoleronica at hotmail.com>> wrote:
...and suddently, the analogue display of the Yaesu G-5500 (Elev / Azim)...I mean the needles stopped moving.   Neither the Elevation nor the Azimuth needles are moving at all but the rotor is working when tracking with SatPC32 / LVB.

Any hints on repairs are / will be appreciated.

Who repairs this control boxes?

Thanks

Rafael / NN3RP


_______________________________________________
Sent via AMSAT-BB at amsat.org<mailto:AMSAT-BB at amsat.org>. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb