[amsat-bb] IC9100 USB Port

[Stefan Wagener]

You should have no problem;

if your USB (Silabs) driver was installed previously and the radio was
working via USB;

if you have the correct settings for USB (Com port), baud rate and CI-V
address.

Nothing changes with a SatPC32 if you saved the previous installation files
and use them as part of the SatPC32 "upgrade" installation:

http://www.dk1tb.de/updateinstructions.htm

hope this helps,

Stefan



On Wed, Feb 24, 2016 at 7:16 PM, Tom Lubbers K8TL <k8tl at earthlink.net>
wrote:

> While reinsatlling and upgrading PCSAT 32 I ran across a page that gave
> some detailed instructions and cautions for using the USB port on the 9100
> with PCSAT32.  I made a mental note to make a copy of it, my mental note
> book is defective anyone know what article I'm talking about and where it
> is?
> Tom Lubbers K8TL
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>