[amsat-bb] LilacSat-2 Transponder active over N America 13:15 UTC

[KO6TZ Bob]

Clayton,

Thanks for the "Heads-Up" worked perfect.  A couple of taps on the "-" 
key and SatPC32 tracked the satellite perfect.  Had a QSO with Glenn.  
Nice sounding transponder.

KO6TZ
Bob


I should have been a little more clear in my email earlier.  The
transponder on LilacSat-2 active today was not the normal FM one but
rather a SSB transponder.  It is experimental and has no AGC according
to the reports from Twitter.  I'd suggest paying attention to the
AMSAT OSCAR status page (http://www.amsat.org/status) and following
BG2BHC on Twitter for operational updates.

I was using manual control but you can add this line to your
DOPPLER.SQF.  It will need some minor calibration:

LILACSAT-2,437200.0,144362.0,USB,USB,NOR,0,0,SSB Transponder

73
Clayton
W5PFG

On Mon, Jul 11, 2016 at 9:26 AM, Clayton Coleman <kayakfishtx at 
gmail.com> wrote:
 > This morning, Glenn AA5PK, and I had a QSO via the experimental
 > transponder activated on LilacSat-2.  It was very interesting and fun.
 > A non-inverting mode J transponder was new to me.
 >
 > Using manual tuning to adjust for Doppler shift proved to be a small
 > challenge as I am more accustomed to operating on a transponder like
 > FO-29.  Running SDR in parallel to my Icom IC-9100 gave me a good
 > visual representation of the transponder pass band.
 >
 > You can listen to a brief clip of our QSO here:
 >