[amsat-bb] AO-85

[Clayton W5PFG]

I've had some similar issues as well.  I usually blame operator error on 
my part.  When this has occurred, I reset HDSDR back to its original 
configuration.

"Options -> Misc Options -> Reset to factory settings" are the menu 
picks.  I then will use my personal "cheat sheet" to setup HDSDR back to 
my preferences.  This has fixed the type of issue you describe Jerry 
several times.

73
Clayton
W5PFG

On 7/13/2016 11:33, Jerry Buxton wrote:
> Steve,
>
> I have a similar problem, I used HDSDR for a couple of years in the
> development/testing of the Foxes and then "one day" a few months ago,
> FoxTelem just quit decoding what came from HDSDR.  I never found a
> reason, after tweaking everything I know of to tweak.  Same symptoms as
> yours, looks right but doesn't decode.
>
> I had also used SDR# in some of the testing so I switched back to it and
> it has been working fine.  I still try HDSDR now and then and it still
> doesn't work.
> This was all on the same PC running Windows 10, so HDSDR worked and then
> just didn't.  I don't know if it was a Windows update or what.
> Anyway you might want to try another SDR application, to see if you can
> get back on track.
>
> Come to think of it I just built a new PC so maybe I'll try HDSDR on it
> now, and see if it works or not.  We're testing RadFxSat so maybe I can
> let it run while I'm in the Fox Labs doing the testing and see if it
> captures any of the test data.  I will (try to remember to!) let you
> know if it does work on the new PC.  FWIW, I'm not recommending a new PC
> just to make it work!     :-D
>
> Jerry Buxton, NØJY