[amsat-bb] LilacSat-2 APRS digipeater mode

[Rick Tejera]

Clayton,

By "just use BJ1SI-1 as your first repeater" do you set BJ1SI-1 in the
packet path? 

Rick Tejera (K7TEJ)
Saguaro Astronomy Club
www.saguaroastro.org
Thunderbird Radio Club
www.w7tbc.org
623-572-0713
623-203-4121 (cell)
SaguaroAstro at cox.net

-----Original Message-----
From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of Clayton
Coleman
Sent: Sunday, June 19, 2016 5:28 AM
To: AMSAT-BB
Subject: [amsat-bb] LilacSat-2 APRS digipeater mode

BG2BHC sent out the following messages on Twitter this morning.  I am
going to be on as W5PFG-1 via LilacSat-2 on 1230 UTC pass:


LilacSat-2 multi-mode APRS digipeater is ON now. The uplink is on
144.350 and the downlink is on 437.200. @amsat @amsatuk

For the real-time mode, just use BJ1SI-1 as your first repeater. @amsat
@amsatuk

For the delayed mode, use BJ1SI-2 and minutes to be delayed in ASCII
as your 1st and 2nd repeater. Pad 0 for bytes unused. @amsat @amsatuk


73,
Clayton
W5PFG
_______________________________________________
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb