[amsat-bb] SAT PC 32 AND YAESU FT-847

[Eric Knaps, ON4HF]

Hello Jeff,

I have the same problem here. Changed baudrate and all kind of settings. 
Nothing helps.
If you go to the "cat" menu in satpc32 you can change the cat speed x1, 
x5 or x10.
Only at speed x1 i have no problem, but than the radio is changing its 
frequency every second.
At cat speed x5 it's much better but than the radio changes modes when 
turning the vfo.
My solution was simple, I connected another radio :-)
I use a ic-910 now and no problem anymore and i use the FT-847 as backup 
radio.

73,
Eric.

Amateur radio station ON4HF
Satellite manager UBA
Member Amsat-NA #39595
Member Amsat-UK
Member Amsat-ON

http://www.on4hf.be

Op 19/03/2016 om 23:22 schreef jeffory broughton:
> If I turn the vfo knob on the ft847 too fast , it will change modes from
> lsb to usb on the radio.if I turn off cat cotrol
> And turn it on again it cures the problem.
> I have two ft 847 radios,it have tried both of them with the same results.
> What am I doing wrong ?
> Jeff
> WB8RJY
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb


---
Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware.
https://www.avast.com/antivirus