[amsat-bb] Yaesu G5500 Rotator

[Douglas Phelps]

Mine came with everything for mounting on the mast or the rotor.
DougK9DLP

 
      From: J Bennett <Ke4kol at bellsouth.net>
 To: 'Michael' <Mat_62 at charter.net>; 'Norm n3ykf' <normanlizeth at gmail.com>; amsat-bb at amsat.org 
 Sent: Sunday, March 27, 2016 6:40 PM
 Subject: Re: [amsat-bb] Yaesu G5500 Rotator
   
Doesn't the G5500 come with the separation kit.  Isn't the separation kit
only the two bracket that mount on top of the azimuth rotor that allows
mounting the mast to it.  then you mount the elevation rotor to the mast.  I
just purchase the G5500 and it came with everything that was needed to mount
the two rotors separate or together.

-----Original Message-----
From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of Michael
Sent: Sunday, March 27, 2016 3:18 PM
To: Norm n3ykf; amsat-bb at amsat.org
Subject: Re: [amsat-bb] Yaesu G5500 Rotator

  Thanks much for the picture although I'm still a bit confused. A lot of
folks say I need the separation kit and you said I don't. I'm about to make
the purchase soon and I want to get this right. I know a lot of folks say an
elevation rotor is not even needed these days but I have wanted and coveted
one of these rotor systems a very long time and the XYL  and CFO finally
authorized the funds for purchase.
Thanks again for the pic and the advice.
73,
Michael, W4HIJ
On 3/26/2016 9:35 AM, Norm n3ykf wrote:
> Was out of town when this was posted. Wished to photograph it as the 
> installation is hard to do in reality. Nothing like torching $$$$$.
> Pic of the G-5500 installation split is here:
>
> https://www.flickr.com/photos/n3ykf/25430099854/in/dateposted/
>
> On Mon, Mar 14, 2016 at 1:46 PM, Michael <Mat_62 at charter.net> wrote:
>> I want to mount a small HF beam on a mast and rotate it using the 
>> azimuth portion of the G5500 to point it. Then I'd like to install 
>> sat antenna's up above the HF beam using the elevation rotator.  Is 
>> this where using the "separation kit" comes into play?  I'm having a 
>> hard time wrapping my head around the installation parameters.
>> Thanks and 73,
>> Michael W4HIJ
>>
>> _______________________________________________
>> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available 
>> to all interested persons worldwide without requiring membership. 
>> Opinions expressed are solely those of the author, and do not reflect 
>> the official views of AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite
program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

_______________________________________________
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available to all
interested persons worldwide without requiring membership. Opinions
expressed are solely those of the author, and do not reflect the official
views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

_______________________________________________
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb