[amsat-bb] Does Sat32PC work with an Icom 7100?

[George Henry]

Is there a jack labled CI-V?  If so, the CT-17 should be connected to that. 
Not sure what the Remote jack might be for, but every other Icom radio I 
have ever seen had a CI-V jack...

George, KA3HSW


----- Original Message ----- 
From: "Bruce MacAlister" <w4bruradio at gmail.com>
To: <amsat-bb at amsat.org>
Cc: "Dave Taylor, w8aas" <w8aas at verizon.net>
Sent: Saturday, May 07, 2016 12:53 PM
Subject: [amsat-bb] Does Sat32PC work with an Icom 7100?


>I need advice.  I am trying to get an Icom 7100 connected to Sat32PC.
>
> I successfully connect to the IC-7100 with N1MM and Ham Radio Deluxe. 
> Both
> apps can tune the 7100 and any frequency, mode, etc entered in the 7100 is
> shown on the N1MM and HRD screens.
>
> Sat32PC seems not to connect.
>
> My connection is Win 7, a real serial port as COM1, an Icom CT-17 
> interface
> box with cable to the Remote jack on the IC-7100 transceiver body.
>
> Thinking it might be Windows 7 I tried an old Windows XP machine and got
> the same failure.  N1MM also worked on that XP machine so I know it's not
> the physical connections.
>
> I've been at this for days with no result.
>
> 73, Peace,سلام ,שָׁלוֹם, ειρήνη, Bruce ∞
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions 
> expressed
> are solely those of the author, and do not reflect the official views of 
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> 


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus