[amsat-bb] Stmsat-1 heard ?

[James Cutler]

Please confirm on CADRE.  It should be at 437.485 MHz but we have NOT heard
it.  It would be amazing if you have heard it!

Note, MINXSS is at 437.345...

On Thu, May 19, 2016 at 3:34 PM, KO6TZ Bob <my.callsign at verizon.net> wrote:

> Jeff,
>
> Was CADRE transmitting at 9k6 or 19k2 ?   Also, was it "human readable" or
> something that required decoder software ?
>
> BOB
> KO6TZ
>
>
>
> >at 1150utc,nodes at 437.1 was heard strong ,also Cadre at 437.485,very
> >strong. At my max ele at 60 degrees,a very,very  weak signal with doppler
> >was heard on 437.000.I get another real good shot tomorrow am at 2 am est
> >at 72 degrees.it vas very visable on hdsdr, but only at a very high,in
> the
> >clear pass since it was very,very,weak.jeff wb8rjy
>
> >jeff broughton
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>



-- 
James W. Cutler, Associate Professor
University of Michigan
Department of Aerospace Engineering
1320 Beal Avenue
3013 FXB Building
Ann Arbor, MI 48109-2140
Ph: 734-615-7238
Fax: 734-763-0578
http://www.umich.edu/~jwcutler/