[amsat-bb] ISS Digipeater is back! On UHF this time (437.550MHz)!
Rick Tejera
saguaroastro at cox.net
Thu Nov 3 01:21:40 UTC 2016
Patrick, yeah the pass time aren't great fo me, since I'm at work, save for
that lunchtime pass tomorrow. We'll see what the weekend looks like.
Rick Tejera (K7TEJ)
Saguaro Astronomy Club
www.saguaroastro.org
Thunderbird Radio Club
www.w7tbc.org
623-572-0713
623-203-4121 (cell)
SaguaroAstro at cox.net
-----Original Message-----
From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of Patrick
STODDARD (WD9EWK/VA7EWK)
Sent: Wednesday, November 02, 2016 5:55 PM
To: amsat-bb at amsat.org
Subject: Re: [amsat-bb] ISS Digipeater is back! On UHF this time
(437.550MHz)!
Rick,
Yes, you can program the memories in a TH-D72A either way. I have
yet to do that on my TH-D72A, but used the Kenwood MCP-D74 software
to add those 5 channels to my TH-D74A. If you don't do that,
you have to set the TNC to use one of the "bands" (VFOs) as
the receive band and the other as the transmit band. Since I am
not working this full-duplex, the memory channel approach seemed
easier to do than having to make adjustments in both VFOs.
Maybe we can hook up over the weekend. Other than possibly one
pass early Friday morning, I'm probably not going to be on any
ISS passes until then.
73!
Patrick WD9EWK/VA7EWK
http://www.wd9ewk.net/
Twitter: @WD9EWK
On Thu, Nov 3, 2016 at 12:22 AM, Richard Tejera <Saguaroastro at cox.net>
wrote:
> Patrick,
>
> I didn't even think of using odd split. I has programmed in 5 simplex
> channels into my D72A and figured I'd load them in both bands moving in
> opposite directions.
>
> To program odd split the manual says set up the receive as simplex
> channel and store it. Thee still in VFO mode select the transmit
frequency.
> press [F] and a memory channel should appear, select your memory channel.
> Hold the PTT while pressing [OK]. The Odd split should be saved. The go
and
> name it as usual.
>
> Or if you have the MCP-4A programming software, selectthe memory channel
> tab. Find an open channel and click channel edit. Enter the receive
> frequency, make use the tone is off, and then check the box for Split
> Channel and enter the transmit frequency. Give it a memory name and close.
> Repeat ad nauseam for the rest of the channels.
>
> The passes for me right now are intractable with work though there is on
> 25 degree pass at 1859ut (1159 most), which is right around lunch, so I'll
> try that one. Keep an ear out for K7TEJ-7.
>
> 73
> Rick
>
> Rick Tejera K7TEJ
>
_______________________________________________
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB
mailing list