[amsat-bb] Setting memory frequencies for FM satellite operation

[Andrew Rich]

Ron 

I used to run Linux with predict

Perl code would connect to the predict server port

Then adjust the radio accordingly

Having said that there are some Windows programs that track satellites and control your radio

Andrew

-----------------------------
Sent from my iPhone
Andrew Rich
e vk4tec at tech-software.net
w www.tech-software.net
m 0419 738 223

> On 18 Sep 2016, at 00:53, Ronald G. Parsons <w5rkn at w5rkn.com> wrote:
> 
> Is there a computer program that will compute a table of time, azimuth, elevation for a given satellite and station location for a set of Doppler corrected frequencies (both uplink and downlink) in user-specified frequency intervals.
> 
> For example, SO-50
> 
> TIME       AZ    EL    UP            DOWN
> 0959:00    10    34    145982.17     435165.53
> 1000:00    44    46    145980.66     435170.05
> 
> but where the frequencies are in user-defined increments of 2.5 or 5.0 kHz.
> 
> This would simplify choosing frequency memories for handhelds and when to switch memories when operating FM satellites.
> 
> Ron W5RKN
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb