[amsat-bb] ARISS packet

[Alan]

Decoding is usually the easiest, and Soundmodem is very tolerant of signal
levels.  You could try changing the sampling rates.  I and others have found
in the past there are rates which for unexplained reasons don't work on one
machine, but do on others.

73s,

Alan
WA4SCA



<-----Original Message-----
<From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of
<Richard Lawn
<Sent: Monday, February 27, 2017 19:19 PM
<To: Amsat BB <amsat-bb at amsat.org>
<Subject: [amsat-bb] ARISS packet
<
<I read JoAnne's article in the recent AMSAT journal issue with great
<interest as it was somethingnive never done. I set up UISS with SoundModem
<to work with my Flex5000A. I have no decoding packets whatsoever either
<from ARISS or terrestrial on 144.390. But I've not gotten any feedback to
<suggest I'm being heard. I've tried 144.390 but do not see my location
<coming up on any APRS map. Any idea what I'm doing wrong? I can verify that
<I am transmitting a packet signal. I used packet for a short time years ago
<with a hardware TNC but quickly lost interest and never got into APRS.
<advice would be appreciated.
<
<73
<Rick, W2JAZ
<--
<Sent from Gmail Mobile
<_______________________________________________
<Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
<to all interested persons worldwide without requiring membership. Opinions
<expressed
<are solely those of the author, and do not reflect the official views of
AMSAT-
<NA.
<Not an AMSAT-NA member? Join now to support the amateur satellite
<program!
<Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb