[amsat-bb] Satellite Tracking Engine

[Mike Diehl]

All of the above can be handled by an Arduino or compatible board that has a wifi or Ethernet module. I did it with an Adafruit Feather M0 and TFT feather wing. I started development on the auto update of keps from AMSAT using a wifi version of the board. I had to pack all that stuff up when I relocated out of Los Angles but now that I have to deal with winter I plan to get back to some of these projects that are collecting dust. You can have a look at one of my posts on twitter here https://twitter.com/w8lid/status/894272192480911360

73,
Mike Diehl
W8LID

> On Nov 1, 2017, at 12:31 PM, Andrew Rich <vk4tec at internode.on.net> wrote:
> 
> Hello
> 
> I used to make use of predict using scripts 
> 
> Since then the raspberry pi and arduinos have come along 
> 
> What LINUX satellite tracking program could be queried or send data about 
> 
> Satellite elevation and angle
> 
> Satellite doppler frequency 
> 
> I want to make a multi satellite radio and rotor control box with auto update keeps
> 
> I want to use perl to do the hard work
> 
> I want an arduino or the Pi to do the doppler and rotator 
> 
> Andrew 
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb