[amsat-bb] 9100 AEA DSP2232 WiSP setup

[kb2mjeff at att.net]

I'm a little confused trying to get the setup working with the 9100. I can 
key the 2232 into PTT, but not the 9100. I'm using a cable that I built 15 
years ago to work with my 847 and 910. looking at the 9100 manual it sez I 
can use the ACC port OR the DATA2 port.  I'm thinking now with the 9100 I 
might have to use the ACC connection on the 9100? Is anybody successfully 
working 1200 or 9600 packet with a TNC and  the 9100, with either the DATA2 
or ACC port?

73 Jeff kb2m




I'm using a 9100 with a PacComm Sprint-2. The cable setup is different than 
the 910...it's one jack on the rig rather than two.

73, Drew KO4MA

> On Nov 3, 2017, at 8:07 PM, <kb2mjeff at att.net> <kb2mjeff at att.net> wrote:
>
> I had some time today to start working on my Pacsat station. Is anyone 
> else trying to setup a 9100, WiSP, DSP2232, and SatPC32 ?  I got the setup 
> to rx 1200 baud APRS packets, but can’t rx 9600 baud from Falconsat-3. I’m 
> using an old cable I used to use with a 910, and an FT-847. I have 9600 
> baud turned on. Anyone else get this to work?
>
> 73 Jeff kb2m


---
This email has been checked for viruses by AVG.
http://www.avg.com