[amsat-bb] FalconSat-3: UZ7HO's Soundmodem Full Duplex Mode

[Alan]

Tony,

You may be able to use the digi using Easyterm and High-Speed Soundmodem. 

As Paul has said, you must use WiSP (or pb/pg) to use the PBBS.  I no longer
have 9600 baud TX capability, but back in the AO-51 days, I was able to use
MixW with WiSP.  MixW generates a virtual serial port KISS TNC, which can be
coupled to WiSP using virtual serial ports.  MixW is $50, but you get a 30
day trial.  Another possible program is Dire Wolf.  I have never used it
that way, but the documentation of the latest version mentions a virtual
serial port TNC emulation.  That is free.

I expect that many of those using the PBBS are using hardware modems which
support 9600 baud.

73s,

Alan
WA4SCA
 

<-----Original Message-----
<From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of Tony
<Sent: Friday, October 06, 2017 12:36 PM
<To: amsat-bb at amsat.org
<Subject: Re: [amsat-bb] FalconSat-3: UZ7HO's Soundmodem Full Duplex Mode
<
<All:
<
<I tried accessing Falconsat-3's BBS via PFS3-12 this afternoon, but I
<wasn't able to connect. I'm using Easyterm with an experimental
<full-duplex sound card modem by UZ7HO. This version has it's DCD
<disabled to allow full-duplex operation.
<
<Assuming the BBS is turned on, are there any special parameters needed
<when using a simple terminal program? It would be nice to use Wisp
<again, but I don't see a way to use a sound card modem with this program.
<
<Thanks,
<
<Tony -K2MO
<_______________________________________________
<Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
<to all interested persons worldwide without requiring membership. Opinions
<expressed
<are solely those of the author, and do not reflect the official views of
AMSAT-
<NA.
<Not an AMSAT-NA member? Join now to support the amateur satellite
<program!
<Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb