[amsat-bb] Signalink Modification for 9600 baud

[Rick Kowalewski]

Hi Christy,

Correct, pin 4 on the 6 pin mini-din to Signalink SPKR pin.
With the IC-9100, for example, it must be set to FMD (FM Data). Looks 
like the FT-847 needs menu #23 (Pkt-Rate) set to 9600.

The cable I'm using is the SL-CAB6PM.  This has all 6 wires connected.  
I was using it with a FT-847 when I had one.  Plugs straight into the 
IC-9100.  Just need to change the Signalink jumper from 5 to 4.

I'm still yet to try TX.  Will get there though :)

73,
Rick VK6RK

On 12/10/2017 09:56, christy hunter wrote:
> Hi Rick.
> thanks for commenting. for your setup I assume you are using the IC9100 6pin dataport?
> the USB signalink is wired to pin 4(9600)?
> and are you also Tx 9600 packet, uplinking to the Satellite?
> my signalink has the little plug (sans connection to the pin 4), and with my radio cant test the
> receive portion without rewiring to pin 4. (have tested as is with no joy).
> 73
> christy KB6LTY
> --------- you wrote ----------
> Well that's interesting.
>
> I've used a USB Signalink with an Icom IC-9100 and hs-soundmodem to
> successfully decode 9600 from Falconsat-3.
> To my knowledge, the Signalink has not been modified.
>
> 73,
> Rick VK6RK
>
> On 12/10/2017 05:55, christy hunter wrote:
> >/based on discussion with a technician at Tigertronics, the USB />/signalink will not allow 9600 baud packet due to the frequency />/response is too narrow. He said none of the commercial external />/soundcards will work with 9600 bd packet. The only option is to />/construct a circuit, or use a 9600 baud TNC. (not too many options on />/that front.) />//>/the Tigertronics website is a bit miss-leading because it ref. 9600 />/baud on its wiring diagram. Mine is setup for the 6pin miniDin />/connector(the pin 4 - for 9600 bd on my radio dataport- is not />/connected) for my FT 847.  At this time I can only decode by />/connecting the 9600 pin on my radio (dataport) to a line-in to my />/Laptop soundcard (and not using a isolation circuit). />//>/It would be nice to hear of any solution to this, without buying a />/$400 TNC (kantronics 9612). />//>/there are several websites that talk to this issue, here is one of them />//>/https://www.soundcardpacket.org/5modes.aspx />//>/73 />/Christy KB6LTY/