[amsat-bb] 9100 CAT tuning doppler

[Erich Eichmann]

Todd,
in the upper section of  menu "Mode" choose "Doppler Correction at 
....Uplink and Downlink". In the lower section of the menu usually 
choose  "Display in Frequency Window ....Doppler Shift".  The option 
"Frequency at Satellite" is very helpful if you want to agree a 
frequency for a QSO.  Then the chosen frequency is valid for both 
operators. So, they will immediately hear each other regardless of the 
different Doppler shifts at both locations.
73s, Erich, DK1TB

Am 12.10.2017 um 23:13 schrieb Todd:
> Maybe somebody can help me out. I am switching out computers and 
> installed SatPC32 on the other machine. It's been a while since being 
> on the satellites and forgot some operating functions with the SW. 
> When SatPC32 is correcting for doppler does both Uplink/downlink 
> frequencies change on the radio? Or just uplink? I have "At Satellite 
> doppler" enabled. I noticed the only one changing was the uplink. Any 
> help?
> Thanks,
> Todd
> AL7PX
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. 
> Opinions expressed
> are solely those of the author, and do not reflect the official views 
> of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite 
> program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>