[amsat-bb] Help with Mirage KP-2 mast mounted preamp

[W3AB/GEO]

IMHO, I would review the data sheets for the FETS you have, take some voltage measurements in the inop boxes then see if they might work in the circuit.

Thete is more to it than that, noise figure, gain, etc but it is a start.

⁣___
Sent from my two way wrist watch
73 de W3AB/GEO​

On Oct 25, 2017, 07:45, at 07:45, Eduardo PY2RN <py2rn at arrl.net> wrote:
>
>I need to replace the FETs for both: KP-2/2m and KP-2/70cm, I look for
>schematics and parts list for these units for some years already and
>wasn't able to find anywhere on the Internet. The "mysterious" FET
>seems to be the same for KP-2/2m and KP-2/70cm on the circuit (KP-2
>rev. B) and it feeds another FET: J310 for 144Mhz and a J309 for
>435MHz. I have couple spares of MFG1302 and 3SK74, not sure if it would
>make a good direct replacement ?
>Thanks 
>73
>Ed
>PY2RN
>_______________________________________________
>Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
>to all interested persons worldwide without requiring membership.
>Opinions expressed
>are solely those of the author, and do not reflect the official views
>of AMSAT-NA.
>Not an AMSAT-NA member? Join now to support the amateur satellite
>program!
>Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb