[amsat-bb] LVB Tracker to SATPC32

[Norm n3ykf]

George,

You'll have to enable the rotator fx in satpc32.

Then, when the program starts, serversdx will give you an error
(defaults to com 0). Cancel it. It will be on the toolbar at the
bottom of the window. Click on server sdx, select setup, tell it com
port and speed (9600 8N1 IIRC). Click ok, restart satpc32. It should
find the tracker.

Troubleshoot com port problems using a loopback test. Use a female
jumper from tx pin to rx pin on the DB9. Open your fave terminal. Talk
trashy to yourself. See it? Good! Not? Start down the troubleshooting
tree.

Have fun!

Norm 5J0YKF (for a few more days)

On Sun, Sep 17, 2017 at 2:57 PM, George Sakai via AMSAT-BB
<amsat-bb at amsat.org> wrote:
>  I have not been able to get the LVB Tracker to talk to SATPC32 in my IC-9100.  I am using a Keyspan USA 19HS USB-to-serial adapter between the LVB Tracker and my laptop (Windows 8, 64 bits).  When I start the SATPC32 program, I get an error message "Port 1 could not be found".  According to the device manager in my PC, the Keyspan 19HS has COM2 assigned.  I selected COM2 for rotor setting.  I think I am supposed to select the same COM2 for ServerSDX.  But, I never get ServerSDX box on the screen.  Appreciate any help you can give me.  Thanks.  George N3GS
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb