[amsat-bb] FalconSAT-3 PacSats

[Alan]

Jeff,

I don't have 9600 baud TX, but I have used the MixW virtual TNC to copy the
BBS and digi with WiSP and a VU5K.  Looks just like 25 years ago when I was
using a hardware TNC.  Should work witi the any rig if you have the right
soundcard interfacing.  I have already have a copy of MixW, but there is a
30 demo, last time I looked.  

73s,

Alan
WA4SCA




<-----Original Message-----
<From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of jeff
<griffin
<Sent: Monday, September 25, 2017 09:36 AM
<To: 'AMSAT' <amsat-bb at amsat.org>
<Subject: [amsat-bb] Falconsat-3 pacsat
<
<I'm interested in getting back on the pacsat(s). It's been awhile, I'm
<thinking about 15 years since I ran WiSP. I just installed a copy of WiSP,
<but my software key is in Florida at my winter home, so I'm running the
<demo.  Now a few questions.
<
<
<
<1 Is anybody doing the BBS on FalconSat-3?
<
<2. Is so what software are you using?
<
<3. can someone recommend a software derived 9600 baud TNC that will talk
<to
<either a Flex VU5K, or an IC-9100. I would need this to work with a WiSP
<like program to do the BBS thing. Thanks for helping this old guy get
<restarted with pacsats.
<
<
<
<73 Jeff kb2m
<
<
<
<
<
<_______________________________________________
<Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
<to all interested persons worldwide without requiring membership. Opinions
<expressed
<are solely those of the author, and do not reflect the official views of
AMSAT-
<NA.
<Not an AMSAT-NA member? Join now to support the amateur satellite
<program!
<Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb