[amsat-bb] FalconSAT-3 PacSats

[jeff griffin]

Hi Alan! Very good, before I moved forward it's good to see someone getting
it working, it assures me that I'm not wasting my time. I have a registered
copy of MixW, but also think I left the registration key in Florida. I also
have a DSP-2232, and a Symek TNC3S in Florida. I think the Symek is a
1200/9600 baud unit, but the 2232 can run 9600/9600 baud, I think. This will
be fun getting them running again with WiSP :-).

 How come your uplink is limited to 1k2?  

73 Jeff kb2m


-----Original Message-----
From: Alan [mailto:wa4sca at gmail.com] 
Sent: Monday, September 25, 2017 1:30 PM
To: 'jeff griffin'; 'AMSAT'
Subject: RE: [amsat-bb] FalconSAT-3 PacSats

Jeff,

I don't have 9600 baud TX, but I have used the MixW virtual TNC to copy the
BBS and digi with WiSP and a VU5K.  Looks just like 25 years ago when I was
using a hardware TNC.  Should work witi the any rig if you have the right
soundcard interfacing.  I have already have a copy of MixW, but there is a
30 demo, last time I looked.  

73s,

Alan
WA4SCA




<-----Original Message-----
<From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of jeff
<griffin
<Sent: Monday, September 25, 2017 09:36 AM
<To: 'AMSAT' <amsat-bb at amsat.org>
<Subject: [amsat-bb] Falconsat-3 pacsat
<
<I'm interested in getting back on the pacsat(s). It's been awhile, I'm
<thinking about 15 years since I ran WiSP. I just installed a copy of WiSP,
<but my software key is in Florida at my winter home, so I'm running the
<demo.  Now a few questions.
<
<
<
<1 Is anybody doing the BBS on FalconSat-3?
<
<2. Is so what software are you using?
<
<3. can someone recommend a software derived 9600 baud TNC that will talk
<to <either a Flex VU5K, or an IC-9100. I would need this to work with a
WiSP <like program to do the BBS thing. Thanks for helping this old guy get
<restarted with pacsats.
<
<
<
<73 Jeff kb2m




.