[amsat-bb] Working satellites with Morse

[Matt - nj4y]

I've worked a number of cw stations on fo-29, both cross-mode (when I 
don't have a key) and on cw myself. Less than 5w always... and all but 
one time was with 2xFT-817 hanging around my neck with a palm pico stuck 
on one of them, and a handheld arrow antenna while tuning manually. So I 
would say if you are having trouble hearing other cw ops, it might be 
worth checking over your station (esp the rx signal path..). If satpc 
isn't keeping up with doppler, maybe check your tuning steps too..

73

- Matt nj4y

On 4/26/2018 2:58 PM, Marshall R. Toburen wrote:
> Mike,  I've had similar experience, very few stations appear to operate CW.  I've only had 3 CW QSOs, one which was cross mode.  My SatPC32 does not provide good enough Doppler correction for CW.  I operate split and adjust TX to remain on "fixed"  RX frequency.. If I hear a CW signal, I'll definitely make a call.
>
> Marshall, AA0FO
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb