[amsat-bb] Terrestrial Data Transmission & 38K4 Baud satellite

[jeff griffin]

Years ago when I modded my FT-847 to RX 38k4 baud from the pacsats I left
everything connected and used a simple multi pole switch to go back and
forth. I had everything wired to the same ACC jack. I still have my Symek
38k4/9k6 TNC3S, but no receiver to go with it if anyone is interested :-)

73 Jeff kb2m

-----Original Message-----
From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of Vincenzo
Mone
Sent: Sunday, August 5, 2018 9:11 AM
To: Amsat - BBs
Subject: [amsat-bb] Terrestrial Data Transmission & 38K4 Baud satellite

Guys, hope in an help.
I have mounted the 38k4 Baud into my Kenwood TS-2000X.It has been mounted
from the technical that make the 38k4 baud board.
When I saw the radio after the modifications I have noticed that, he has
used for the RX and TX connections the ACC2 Connector.
Now I have two ACC cables that I have to keep plugging and unplugging. I
mean when I have to do Terrestrial data communications 

like RTTY BPSK Packet etc. I have to use the old ACC2 cable, When I have to
use the 38k4 I have to use the new one. 

Anybody can suggest me a way to avoid to plug and unplug the cables when
necessary?
Any help will be really appreciated.



 

73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520




      *********************************

      ******   GSM  +39 328 7110193  ******

      *****     SMS  +39 328 7110193    *****

      *********************************

 

_______________________________________________
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb