[amsat-bb] FW: Doppler file

[Peter Goodhall (2M0SQL)]

Doppler.SQF are defined and managed by the user, updating TLEs has no
effect on it.

It's worth remembering frequencies will be always need tweaked during
configuration, rigs can be off frequency or even drift.

Peter 2M0SQL


On Wed, 19 Dec 2018, 23:36 Ted Krempa <k7trkradio at charter.net wrote:

> Hello, can anyone else answer my question below.....(Joanne must be busy)
>
> Thanks, Ted
> K7TRK
>
> -----Original Message-----
> From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of Ted Krempa
> Sent: Monday, December 17, 2018 3:49 PM
> To: 'JoAnne Maenpaa'; 'Dave'
> Cc: amsat-bb at amsat.org
> Subject: Re: [amsat-bb] Dobbler file
>
> Good stuff, Joanne...thanks
>
> One thing, though, that I have never understood, however:  Does SatPC32
> properly update keps and the sqf data when the 'update' option is used in
> the program? Or do we need to keep updating manually. I can understand with
> a new sat, manually trying to find the right data, but after the sats are
> rolling along for a few weeks the normal sites that identify keps usually
> have that data current.
>
> Thanks for any input
>
> 73, Ted
> K7TRK
>
> -----Original Message-----
> From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of JoAnne
> Maenpaa
> Sent: Monday, December 17, 2018 5:54 AM
> To: 'Dave'
> Cc: amsat-bb at amsat.org
> Subject: Re: [amsat-bb] Dobbler file
>
> Perhaps these messages from the amsat-bb from a few weeks ago might offer
> a starting point?
>
> https://www.amsat.org/pipermail/amsat-bb/2018-October/069839.html
> https://www.amsat.org/pipermail/amsat-bb/2018-November/070451.html
>
> --
> 73 de JoAnne K9JKM
> k9jkm at amsat.org
>
>
> > -----Original Message-----
> > From: AMSAT-BB [mailto:amsat-bb-bounces at amsat.org] On Behalf Of Dave
> > Sent: Monday, December 17, 2018 7:40 AM
> > To: James McIrvin
> > Cc: amsat-bb at amsat.org
> > Subject: Re: [amsat-bb] Dobbler file
> >
> > I’m not sure if you received a private response but I have a similar
> issue.
> > I tried to use SatPC32 the other day and found many of the satellite
> > frequencies were not correct. I’m going to have manually edit a bunch of
> > them unless I can find someone with a good set of files.
> >
> > Dave
> > N2OA
>
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>