[amsat-bb] Fox telemetry software question

[Ron VE8RT]

Super, really good news JoAnne!

   when I first got back on the sats (was active from FP as FP/VE1KM
and FP4EK, then FP5EK in the 1990's) I used Gpredict but added the satellite data by
hand.  I'll follow your instructions.

   Ron VE8RT

On Sat, 22 Dec 2018 08:19:56 -0600
"JoAnne K9JKM" <joanne.k9jkm at gmail.com> wrote:

> Good morning Ron,
> 
> > Ideally I guess would be a small package with Fox Telem running on
> > Raspberry Pi like processor, tied to a SDRPlay receiver, on an omni
> > antenna.
> 
> A pre-configured SD Card for the Raspberry Pi with the Raspbian operating
> system and FoxTelem loaded is available in the AMSAT Store:
> https://www.amsat.org/product/fox-in-a-box-raspberry-pi-sd-card/
> Just insert the SD card in your Raspberry Pi and FoxTelem starts when you
> boot up.
> 
> I run the Fox In A Box with an inexpensive $20 RTL-SDR dongle. It works but
> I've discovered a better receiver like the SDR Play will give better
> results. I'm using the pre-amp that used to be in the AMSAT Store - it was
> just laying around anyways. My antenna is a spare 2 meter vertical.
> 
> > I have some work yet to do with the new Gpredict
> > installation too, satellites need to be added.
> 
> GPredict will add satellites for you ... 
> 
> From the main screen select 'Edit --> Preferences'
> Then from that 'GPredict Preferences :: General' screen select the 'TLE
> Update' tab
> The TLE sources default to Celestrak, etc. I changed my TLE source to AMSAT:
> Make the TLE source http://www.amsat.org/amsat/ftp/keps/current/nasabare.txt
> on some GPredict versions you make the source:
>    http://www.amsat.org/amsat/ftp/keps/current/ and then make the file to
>    retrieve nasabare.txt
> Check the option for 'Add new satellites to local database' box. You'll get
> all of the recent satellites and every time a new satellite is added to the
> Keps it will be added at your QTH when you update the Keps. Pick the new
> satellite from the configuration view.
> 
> --
> 73 de JoAnne K9JKM
> k9jkm at amsat.org
> 
> 
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb


-- 
Ron VE8RT <ve8rt at yknwt.ca>