[amsat-bb] Need help with Sat32PC & Icom 7000/7100

[Erich Eichmann]

Hi Butch,
With the IC-7000 the default address is $70  (= hex 70) as far as I know.
The IC-7100 has no own item in the 'Model' list in the setup menu. 
Choose the compatible IC-7000.  Of course,   the address must be the one 
of the IC-7100.  You will find it in the manual in the chapter about the 
CAT commands. The examples usually use the address of the particular radio.

With the up/down controls you can changes the address values (first for 
Downlink, second for uplink). With a single radio  both values must be 
equal.

The "Address Ok" button transfers the values to the data file. To save 
the settings click the "Store" button.

73s, Erich, DK1TB

Am 10.02.2018 um 21:16 schrieb Butch via AMSAT-BB:
> In particular, under Setup > radio setup > Addresses
> 1. What values to use?
> 2. What does “Address OK” do?
> Thanks,
> Butch K8KO  occamrazr     yahoo.com
> _______________________________________________
> Sent viaAMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings:http://www.amsat.org/mailman/listinfo/amsat-bb