[amsat-bb] Arrow ll to camera tripod adapter

[Don KB2YSI]

I am not sure when it may have started, but there is a 1/4-20 threaded
"hole" (actually 2) underneath the foam handle on my Arrow.  I was able to
screw in a bolt from one side through to the other.

So if you have a tripod, you could replace the stock bolt on the quick
release part with a longer one and screw it in through both sides.  I would
think you *could* get away with doing only one side, but I would attempt to
get both sides.

On Sun, Feb 25, 2018 at 4:00 PM, <jim at beeson.cc> wrote:

>
>
>
>
>
>
>
> I have had my Arrow ll antenna for a number of years now. I have seen
> probably hundreds of these mounted to a camera tripod using different
> methods. Does anybody have an easy design they might share?
> 73's
> Jim
> WA5QAP
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
>


-- 
73, Don KB2YSI