[amsat-bb] Wisp & Settings

[w4upd]

I have the same problem. It is registry related since there is multiple 
locations in the Windows 10 registry it tries to store the data. I find 
that If I enter just one satellite (I usually use AO-07), then exit and 
restart GSC, all of the satellites are back (until maybe the next 
reboot). If there is a software update to Windows 10 it almost always 
needs to be done again as I did above.

I don't think WISP32 is supported any longer so not sure this problem 
will get fixed.

Reid, W4UPD


On 6/3/2018 12:31 PM, Vincenzo Mone wrote:
> Hello,
>
> I am trying to set the Wisp on Windows 10 but having problems
>
> to get the settings permanent.
>
> If I go into  Tracking and select the satellites I want to have under eyes,
>
> When I close the GSC and shut down the PC on the next
>
> Start-up of the PC and the Wisp program, I get the lower part of the GSC
> program
>
> Empty. I have to go again in the tracking tab and select again the
> satellites but
>
> At the next shut down and restart I am again at the beginning point.
>
> What to do to get them permanent?
>
> Thanks
>
>   
>
> 73 de Enzo IK8OZV
> EasyLog 5 BetaTester
> EasyLog PDA BetaTester
> WinBollet BetaTester
> D.C.I. CheckPoint Regione Campania
> Skype: ik8ozv8520
>
>
>
>
>        *********************************
>
>        ******   GSM  +39 328 7110193  ******
>
>        *****     SMS  +39 328 7110193    *****
>
>        *********************************
>
>   
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>