[amsat-bb] Funcube Dongle Pro+

[Rolf Krogstad]

IMO, SDR Console v3 is far better than any other SDR software I have tried
for satellites.

After installing, select View, then Satellites.  A new window opens.  You
can configure all the satellites you use and it will set the frequency,
control doppler, show you elevation/azimuth and display the footprint on a
map.  An additional sub-window will show upcoming passes for the satellites
you have configured.

V3 was still in Beta last week, but full release is promised for this month.

Rolf NR0T
EN34

On Tue, Jun 12, 2018, 3:08 PM Paul Andrews <w2hro.fn20 at gmail.com> wrote:

> Satellite Folks,
>
> It there a software package that can fully control a Funcube Dongle
> Pro+ and emulate a traditional receiver?   A la frequency control fine
> enough for SSB doppler adjustments?
>
> I have used the FDP+ as a pan-adapter on satellite but not the primary
> receiver.   The FDP+ is a better receiver than the Baofeng - if it can
> be controlled with good granularity.
>
> 73 - Paul - W2HRO
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>