[amsat-bb] Yaesu G-5500 setup

[Mark D. Johns]

360 + 90 = 450. Not 420. Use all of it if you can, but SatPC32 will seldom
go the whole extra 90 degrees. As noted by others, the ability to do the
back flip, 180 degrees of elevation, is usually of more utility.

North or south stop is religion, not science (though I'm sure someone has
done the math to prove me wrong on that). Your preference. I use a north
stop, even though I'm located fairly far north.
--
Mark D. Johns
KØJM / MØGZO / ex-9H3DJ / ex-KØMDJ
Brooklyn Park, MN USA   EN35hd
-----------------------------------------------
"Heaven goes by favor; if it went by merit,
   you would stay out and your dog would go in."
    ---Mark Twain


On Tue, Jun 26, 2018 at 3:12 PM Butch via AMSAT-BB <amsat-bb at amsat.org>
wrote:

> I have no operating experience with satellites.
>
> I am installing this G-5500 az-el rotator on a satellite ground station
> and I am using SatPC32 tracking software and an ERC interface.  Everything
> is operational, so far...
>
> I am trying to decide whether to use 0 to 360 degrees or 0 to 420 degrees
> on the azimuth rotator.
> The station is located in Eastern TN, USA.  The  0 to 420 uses all
> available rotation but then the meter readings are not as useful.  Are
> there any preferences on this?
>
> From a practical, operating point of view, should the azimuth mid point or
> home position have the antenna pointed North or South?  Or some other
> direction?
>
> Thanks for your input.
>
> Butch K8KO
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>