[amsat-bb] To SatPC Users

[Robert Bruninga]

He means "Beacon with the serial port unattended (though the operations
still manned...)"
Since unattended beacons via the APRS digipteaters in space are not welcome
except
for possibly some special events or experiments.   Bob, WB4a{R

On Sun, May 6, 2018 at 5:41 PM, <kb2mjeff at att.net> wrote:

> The problem is there is only one comport on the TS-2000. You can use it to
> use the internal TNC with a computer, or you can use it for Doppler control
> with SatPC32. One or the other. But, you might be able to set the TNC up to
> beacon un-attended and use software to control Doppler via the comport.
> Never tried to do it, but it should be possible...
>
> 73 Jeff kb2m
>
> -----Original Message----- From: Erich Eichmann
> Sent: Sunday, May 06, 2018 4:31 PM
> To: Vincenzo Mone ; AMSAT-BB at amsat.org
> Subject: Re: [amsat-bb] To SatPC Users
>
> Hello Vincent,
> the problem you have with the internal TNC of the TS-2000 has nothing to
> do with SatPC32. When the 9k6 Pacsats UO-22, KO-23 and KO-25 were
> operational (about 15 years ago) my friend Guenther, DL9BU, and I worked
> these sats using the Symek TNC 2H and TNC 3S and Wisp32 for data control
> and SatPC32/Wisat32 for rotor and radio control without any problem.
> Several users ran these combinations  around the clock using the auto
> select features of Wisp32 and SatPC32. We - particular DL9BU - also
> tried very intensively  to work these sats using the internal TNC of our
> TS-2000s, but no success. I don't know any one who got the internal TNC
> working for satellite packet operation.
>
> 73s, Erich, DK1TB
>
> Am 06.05.2018 um 20:01 schrieb Vincenzo Mone:
>
>> Hi Folks,
>>
>>
>> Today I got the brilliant idea of ​​wanting to receive the packet with my
>> Kenwood TS-2000X with its internal TNC while the SatPC
>>
>> program was loaded but I noticed that launching the terminal program I
>> had the error of the behavior in when already in use.
>>
>> Now my question is: is there anyone with the same configuration as I was
>> able to receive and decode the packet while using
>>
>> the SatPc program?
>>
>>   What if you want to interact with the ISS while it is in packet mode?
>> Any help will be really appreciated
>>
>>
>>
>>
>> 73 de Enzo IK8OZV
>> EasyLog 5 BetaTester
>> EasyLog PDA BetaTester
>> WinBollet BetaTester
>> D.C.I. CheckPoint Regione Campania
>> Skype: ik8ozv8520
>>
>>
>>
>>
>>        *******************************************
>>        ******   GSM  +39 328 7110193  ******
>>        *****     SMS  +39 328 7110193   *****
>>        *******************************************
>>
>>
>> _______________________________________________
>> Sent viaAMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings:http://www.amsat.org/mailman/listinfo/amsat-bb
>>
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
> ---
> This email has been checked for viruses by AVG.
> http://www.avg.com
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>