[amsat-bb] Has anyone played with the TNC-Pi9K6 for decode of Fox birds

[Milen KG2C]

Hi Kevin,

If you just want to decode 9600 baud you can use a software TNC like the
High Speed Sound Modem by UZ7HO. I have used that to decode Falconsat just
fine with the UISS software. I think Patrick has an article on that exact
setup.

For FoxTelem data I didn't need any sort of TNC, just the radio's audio
stream feeding directly into FoxTelem. I have a video with just that. You
can use the sound from it to test your own decode. Here's a link to it:
https://www.youtube.com/watch?v=ob0BkiZQgFw&t=235s

The TNC Pi9k6 would be useful for transmitting though. It is much cheaper
than any other 9600 TNC! I am curious myself if someone has tried to
transmit with it using 9600 baud to satellites like Falconsat-3.

On Wed, Oct 3, 2018 at 10:28 PM, Kevin Zari <kk4yel at gmail.com> wrote:

> I'm interested in connecting a TNC-Pi9k6 https://tnc-x.com/TNCPi9k6.htm
> up to my IC-910 data port, and seeing if I can decode some FoxTelem data.
> Has anyone played with this, and if not, what TNCs are you using ?
> Thanks
> -Kevin (KK4YEL)
>
> -----
>
> The problem with the world is that the intelligent people are full of
> doubts, while the stupid ones are full of confidence.
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>