[amsat-bb] 9.6k woes and FoxTelem

Kevin Zari kk4yel at gmail.com
Wed Oct 10 15:42:01 UTC 2018


Frank, I have read through the manual and it doesn’t appear the IC-910 has a button to long press to put it in digital mode. Also, I learned that the 9600 mode is only a toggle for the TX. On RX, it doesn’t change the signal getting on pin 4 or not. The audio is always on pin 4.
-Kevin 


-----

The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence.

> On Oct 10, 2018, at 11:06, Frank <K6FW1 at verizon.net> wrote:
> 
> I  have a IC-9100.  In addition to setting the menu item to 9600 baud, the radio has to be in FM digital.  To put the IC-9100 into FM digital the FM mode button is de[pressed until the “D” icon shows on the display.  This disables the filtering to allow the DUV audio from the satellite to pass onto the sound card.  I don’t have an IC-910 so don’t know if this applies to that radio.  
> 
> I am using the IC-9100 into a computer sound card and Foxtelem and decoding the data and uploading to the server.
> 
> Frank
> K6FW
> 
> 
> 


More information about the AMSAT-BB mailing list