[amsat-bb] Need help figuring out ISS Packet UPlink stuff

[Dave Webb KB1PVH]

Bob,

To:CQ
Via:ARISS

Dave-KB1PVH


Sent from my Galaxy S9


On Tue, Oct 23, 2018, 9:47 AM Bob KD7YZ <kd7yz at denstarfarm.us> wrote:

> Hi, after I switched to Win 10/64 pro a couple weeks ago, I no longer
> can make program UISS/AGWPE get a response from the ISS 145.825 AX.25
> setup.
>
> NOTE: I regularly decode packets from them ... even a few mins ago.
>
> What settings, with respect to uplink, am I missing ?
>
> I use an IC910H for the ISS work and a 2m 5wl beam on Alpha-Spid rotator.
>
>
> If I could test the UISS program SENDING a packet locally to some sort
> of APRS or AX.25, then I could test the setup on the earth path.
>
> I do not know how to do that. As, even though I copy/decode 144.390
> packets here, and 145.825 packets here, I try sending but do not know
> what to put in the "TO" and the "VIA" to be able to make that station
> hear me .. or repeat me .. or send an ACK ... whatever
>
> I am clueless on what form, or PL, I need to use on either the ISS or
> into the packet system.
>
> someone give a basic format that will allow me to test this station
> setup earth-wise please ??
>
> thank you very much.
>
>
> --
> 73,
> Bob KD7YZ LM# 901
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>