[amsat-bb] SatPC32 and IC-9700
k6vug at sbcglobal.net
k6vug at sbcglobal.net
Thu Apr 18 02:08:43 UTC 2019
I have an Icom-7000 and I have set the same CI-V address for both in SatPC32. It works fine on simplex and provides the right doppler for TX as well as RX.
FYI - it should also automatically turn-on the Split mode in the radio to update both VFOs periodically, if not just turn on the Split mode yourself.
I use it for ISS APRS and recently the AISat-1. Hope that helps.
73!Umesh, k6vug
On Wednesday, April 17, 2019, 3:35:13 AM PDT, Dave Webb KB1PVH via AMSAT-BB <amsat-bb at amsat.org> wrote:
Did you try using SatPC32 ISS instead of the regular SatPC32 for simplex/in
band satellites?
Dave-KB1PVH
Sent from my Galaxy S9
On Wed, Apr 17, 2019, 6:03 AM Richard Ferryman via AMSAT-BB <
amsat-bb at amsat.org> wrote:
> I have an IC-9700 and set up SatPC32 for the IC-9100 as it is the nearest
> option and simply changed the CI-V address. It seems to work OK on cross
> band duplex but I don't seem to be able to find a way to handle the simplex
> satellites. Sometimes I have been able to get the radio to switch to the
> downlink frequency it does not apply the doppler correction on transmit.
> Any Ideas?
>
> Dick G4BBH
>
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
_______________________________________________
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB
mailing list