[amsat-bb] Satpc32 and AO-92 mode L

[Erich Eichmann]

Hi Rich,
the entries for the U/V and L/V transponder of AO-92 could look as follwos:
AO-92,145880,435350,FM,FM,Nor,0,0,Voice U/V
AO-92,145880,1267350 ,FM,FM,Nor,0,0,Voice L/V
You can swithch between  both line in menu  'CAT'.

If your radio doesn't support the L-Band  and you need an up-transverter 
you have to enter the transverter offset at the position of the last 
'0'. If for example the transverter offset is 830000 KHz the line should 
look as follows:
AO-92,145880,1267350 ,FM,FM,Nor,0,830000,Voice L/V
Tune the radio to 437350. The uplink output will then be on 1267350 KHz 
(437350 + 830000)  +/- Doppler shift.

73s, Erich, DK1TB

Am 10.08.2019 um 21:10 schrieb Richard Gussow via AMSAT-BB:

> Hi everyone,
>
> Thanks again to Erich and everyone else who helped me get Satpc32 up and running.
>
> I’d like to try to work AO-92 when it is in mode L. What is the best way to do this with Satpc32?  Change the frequency on the Doppler.SQF file?
>
> Thanks,
>
> Rich 4Z1JJ
>
> Sent from my iPhone
> _______________________________________________
> Sent viaAMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings:https://www.amsat.org/mailman/listinfo/amsat-bb