[amsat-bb] question on g5400 controller

[Stefan Wagener]

Hi Mike,

It really needs much more information. What do you mean with Sat32
controller? Do you run SatPC32 software? If yes, what the USB/serial or
whatever interface box that sits between the PC and the Yaesu Rotor control
box. What's the software setup under "Rotor Setup" in the software......
and so on and on....

Stefan, VE4SW

On Fri, Dec 20, 2019 at 4:09 PM WB8PFZ via AMSAT-BB <amsat-bb at amsat.org>
wrote:

> I am trying to help out someone with a controller. The control box works
> manually but does not work with his Sat32 controller. I am not familiar
> with the software but am trying to diagnose the control box. I am assuming
> a few volts on the DIN connector that correlate with the relay switching
> transistor should cycle the relays. If my thinking is correct how many
> volts would I apply to the DIN pins to prove out the controller is working
> correctly? Hope this makes some sense. Thanks Mike WB8PFZ
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>