[amsat-bb] DUV Decoding question

[Frank]

I am using Data2 6 pin socket pin 4 for 9600 data out.  Turn menu item 57 9600bps mode to on.  Long press “FM” button on front panel for digital indicated by a “D” on the LCD screen.

Frank
K6FW


> On Feb 3, 2019, at 9:13 AM, Francis Geraci <fgeraci14 at gmail.com> wrote:
> 
> First, I want to "Thank", Alan, WA4SCA, for his "guidance". He pointed out
> my problem with "decoding" DUV data. I had forgotten about the "filtered"
> audio issue. He pointed out that I need to use "9600 baud" data. On my
> first decoding attempt, I recorded a pass on my phone, cleaned it up in
> "Audacity" and tried to decode it with the "Funcube" software. That, of
> course, was a failure. Audio was great. No data. decoded.
> 
> Question, Mainly for Icom user's.
> Do I get the unfiltered Audio / DUV from the* 6-pin mini DIN TNC connector*
> or the *#12 pin on the accessory connector ? *I don't know if either
> provides
> unfiltered audio. How do You Icom guys do it ?
> 
> I understand that "Dongles" are perfect, but I don't want a "computer in
> the mix. Just my Icom IC-xxxx. ( 4 each ) My IC-706 is "ready" in a "Go"
> bag.
> 
> Thanks in Advance
> W1FXX - Beautiful Sunny Fla. Key's
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb