[amsat-bb] New Telemetry Decoder for FalconSat-3

Corey Shields cshields at gmail.com
Sat Feb 9 17:19:40 UTC 2019


Hi Chris, we spoke at the symposium about sharing data..

The best way to pull data would be to periodically pull from the api for
db.satnogs.org, however its not working at the moment[1]. I've got some
free time this weekend, I'll see if I can get this fixed.

That said, we have been decoding the messages we have from falconsat-3 into
our dashboard[2] going back to April. Its just running through a message
decoder, no telemetry. It shouldn't be too hard to write a struct for the
telemetry, and re-decode the frames so we can make use of the rest of the
data.

I'll reach out directly once the API is fixed..

Cheers,
-Corey  KB9JHU

[1] - https://gitlab.com/librespacefoundation/satnogs/satnogs-db/issues/266
[2] -
https://dashboard.satnogs.org/d/UZ30F5Xik/ax-25-monitor?refresh=1m&orgId=1



On Fri, Feb 8, 2019 at 7:49 PM Chris Thompson <g0kla at arrl.net> wrote:

> I'm not aware of that data or how to access it.  If there is an archive of
> data and it includes the WE files then it might be useful to us.
>
> 73
> Chris
>
> On Fri, Feb 8, 2019 at 6:25 PM Scott <scott23192 at gmail.com> wrote:
>
> > That's great, Chris!  Thanks for all the work on that project.
> >
> > Regarding telemetry, does AMSAT access the data that is forwarded to
> > SatNogs?
> >
> > Ever since FalconSat-3 was turned over to the Amateur Community, along
> > with
> > I'm sure a lot of others, I have forwarded thousands of telemetry packets
> > from FalconSat-3 to the SatNogs database using the DK3WN Telemetry
> > Forwarder
> > ( http://www.dk3wn.info/files/tlm_forwarder2.zip ).
> >
> > Now, I don't know HOW to access data that is forwarded to SatNogs in that
> > way, but a lot of data is aggregated there from many of the past &
> > presently
> > active satellites that have known decoders.   I'm aware that Univ.
> > Colorado
> > / Boulder obtains data from the CSIM satellite that way; I would imagine
> > others do as well.
> >
> > Thanks again for what I'm sure was a huge job on the new software!
> >
> > -Scott,  K4KDR
> >
> > =========================================
> >
> > -----Original Message-----
> > From: Chris Thompson
> > Sent: Friday, February 08, 2019 5:53 PM
> > To: AMSAT
> > Subject: [amsat-bb] New Telemetry Decoder for FalconSat-3
> >
> > I've written a new Ground station for FalconSat-3. If you had an initial
> go
> > with WISP without success or if you have never tried to decode
> FalconSat-3,
> > now is a good time to try.  This requires much less setup than WISP.  And
> > don't be put off if you don't have a hardware TNC, this will work with a
> > soundcard TNC. Or, if you didn't try to listen to FalconSat-3 because you
> > don't have a station that can transmit commands to the spacecraft, then
> > read on. We still need your help to decode telemetry.
> >
> > In particular we would like to encourage people to download the Telemetry
> > and forward it to an AMSAT telemetry server.  Currently more telemetry is
> > generated than we can download with AMSAT Operations ground stations.
> > Receive only stations can contribute to that as well as stations equipped
> > to transmit to FalconSat-3 and request files.  You can see telemetry
> > uploaded so far here: http://tlm.amsatfox.org/tlm/FalconSat-3
> >
> > There are details about the spacecraft, how to install the software and
> how
> > it works in the manual available if you download the software or online
> > here: http://www.g0kla.com/pacsat/pacsat_ground_manual.pdf
> >
> > You can download the software at www.g0kla.com/pacsat/index.php.  I have
> > also written some blog posts and thoughts about the software for anyone
> > interested.  They are linked from the download page.
> >
> > There is much to do here of course and most of it probably won't get
> done.
> > I would call this a beta release.  If you have suggestions or bug fixes
> > please log them online at https://github.com/ac2cz/Falcon/issues or send
> > me
> > an email.
> >
> > The software is open source.  All the details are here:
> > https://github.com/ac2cz/Falcon/  The telemetry processing and display
> > leverages common code from FoxTelem in a library here:
> > https://github.com/ac2cz/libTelem/
> >
> >
> >
> > --
> > Chris E. Thompson
> > chrisethompson at gmail.com
> > g0kla at arrl.net
> >
> > _______________________________________________
> > Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions
> > expressed
> > are solely those of the author, and do not reflect the official views of
> > AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >
>
>
> --
> Chris E. Thompson
> chrisethompson at gmail.com
> g0kla at arrl.net
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>


-- 
Corey Shields


More information about the AMSAT-BB mailing list